PENTXM4 - 6U Twin Dual Core Intel Xeon processor-base VME Blade |
The PENTXM4 is a 6U VME SBC which features a twin 1.67GHz Dual-Core Intel Xeon processor. It handles server/like data throughput and provides next generation PCI-Express I/O bandwidth capabilities.
The PENTXM4 supports the Intelligent Platform Management Interface (IPMI) specification for easy integration in complex systems.
|
PENTXM2 - 6U Dual Core Intel VME Blade |
The PENTXM2 combines the performance of a 1.67GHz Dual Core Intel Xeon processor with high throughput I/O interfaces: x4 and x8 PCI-Express ports, Dual Ethernet 10/100/1000, Dual SATA-150, triple USB2.0.
The Board Management Controller and the Open IFE firmware ease clustering the PENTXM2 in wide manageable multiprocessing systems.
|
PowerNode5 - 6U VME PowerPC 970FX Rugged Blade Computer |
 PowerNode5 is a 6U VME clone of the IBM JS20 blade design.
It features the PowerPC 970FX, delivering 1.6GHz with less than 20W of power dissipation. The board is available in both commercial Standard Air cooled grade and Rugged Conduction-cooled grade
|
PowerNode3 + - 6U VME PowerPC 7448 G4+ Computing Node |
 The PowerNode3+ is a single/dual 1.4GHz PowerPC G4+ high-end computing node featuring enhanced connectivity and reduced power consumption.
|
PowerNode3 - 6U VME Single/Dual 1GHz G4 High-End Computing Node at 30W |
The PowerNode3 is a single/dual 1GHz PowerPC G4 high-end computing node featuring enhanced connectivity and reduced power consumption. |
| VxG4c - 6U VME Dual/Quad PowerPC 7410 Computing Node |
 The 6U VME V2G4c and V4G4c computing nodes feature two or four 500 MHz Motorola PowerPC 7410 (G4) processors, respectively, with AltiVec vector processing units.
|
| VMPC6d - 6U VME PowerPC 7410 (G4) SBC Single or Dual Processor with AltiVec Technology |
|  The VMPC6d single-board computer (SBC) features the high-speed combination of a 450MHz PowerPC 7410 (G4) processor with the Avignon host bridge.
|
PENTXM – 6U VME Pentium® M Embedded PC |
 The PENTXM is a PC-compatible high-performance, high-functionality VMEbus processor board utilizing the 1.6GHz or the 1.8GHz Intel Pentium M with low power consumption and dual PMC slots.
|
| PENTX3 - Single-Slot 6U VMEbus Pentium III-Based Processor Board |
 The board is designed around the Intel Pentium III Mobile Module that includes a 500MHz Pentium III processor, a 256KB L2 cache, a 440BX Northbridge support chip set to control the processor bus at 66MHz, and a thermal sensor with programmable trip points. |
| PowerEngine7 – 6U VME Single/Dual 1GHz PowerPC 750FX/GX |
 The PowerEngine7 series of single-board computers (SBCs) based on the IBM PowerPC 750FX or 750GX processor delivers high performance and low power consumption. |
| PowerEngineC7 - 3U CompactPCI PowerPC 750GX |
 The first in Thales Computers' line of 3U CompactPCI embedded computers, the rugged, conduction-cooled PowerEngineC7 is based on the low-power IBM PowerPC 750FX processor at 700 MHz. |
| VCE405 - Low-Power Consumption I/O-Oriented SBC |
 The VCE405 connectivity engine provides a flexible off-the-shelf method for quickly developing and deploying cost-conscious high-performance systems. The VCE405 features a 400MHz PowerPC 405GPr and draws less than 7 Watts.
|
| V2PMC2 - Dual-Slot PCI-X/PMC 6U VME Carrier |
 The V2PMC2 PCI-X/PMC carrier card is a 6U VME that holds up to two single-width or one double-width PCI-X/PMC modules.
The V2PMC2 is an expansion board for Thales Computers SBCs PENTXM2 and PENTXM4.
|
|
| V2PMC - Dual-Slot 6U VME PMC Carrier |
The V2PMC expands the mother board PCI bus, using the P0 connector of the VME backplane to directly couple the carrier to the motherboard.
The V2PMC is an expansion board for Thales Computers SBCs and Computing Nodes: PowerEngine7 (version VMPC6a like), VMPC6x and VxG4. |
|
| ICPMC-6 - Triple slots 6U VME PMC Carrier |
| 6U Mezzanine Triple slots VME PMC Carrier. The ICPMC–6 is a companion carrier board of the VMPC4b (PCB F), VMPC5 (PCB F), VMPC6 and VMPC6/RA boards. It expands the motherboard PCI–64 bus. |